Your well pump’s control box is the brain of the system, and when parts like capacitors or relays fail, your water supply stops. Whether you’re troubleshooting a humming pump or replacing a burnt-out component, finding the right Franklin control box parts is critical. In this guide, we evaluate seven top-rated replacement parts, from start capacitors to complete control boxes, to help you restore your well pump quickly. If you’re unsure about your pump’s specifications, our guide on choosing the right well pump can help you match horsepower and voltage.
Pros
- Direct compatibility with multiple Franklin part numbers for straightforward replacement.
- High-quality construction with silver contacts ensures durability and stable performance.
- Easy installation with screw connectors and panel mount design saves time and effort.
- Excellent customer rating (4.7 out of 5) reflects strong user satisfaction.
- Cost-effective solution compared to OEM replacements.
Cons
- Only compatible with Franklin control boxes for 5-15HP pumps, limiting use with other brands or sizes.
- Operates solely at 230V DC, not suitable for 115V systems or variable voltage setups.
- May require basic electrical knowledge for safe installation; not recommended for complete beginners.
The Formiden rva2alkl Well Pump Relay Control Box is a direct replacement relay designed specifically for Franklin control boxes used in 5-15HP, 230V well pump systems. It matches original part numbers 155031102, 155031110, and 305213902, making it a hassle-free swap for worn-out components. This product is ideal for homeowners or technicians maintaining a Franklin well pump who need a reliable, budget-friendly alternative to OEM parts.
Standout features include its precise compatibility and straightforward installation. The screw-type panel mount and automatic operation mode allow you to replace the old relay quickly without complex wiring. With a 35A current rating and silver contacts, it delivers consistent performance to keep your pump running smoothly. Real-world feedback from users highlights its ease of use and long-term reliability, reflected in a strong 4.7-star rating.
Build quality is commendable: the control box uses wear-resistant materials and a durable design that withstands daily pumping cycles. The silver contact material ensures low resistance and minimal arcing, extending the relay's lifespan. While the unit is not universal, its focused design for Franklin systems means it fits precisely and operates as expected.
A potential drawback is its limited voltage and horsepower range: it only works with 230V systems and 5-15HP pumps. Additionally, installation requires basic electrical safety knowledge, though the process is simple for those with some DIY experience. Some users may prefer a more universal relay, but for Franklin-specific applications, this is a top choice.
Verdict: The Formiden rva2alkl is a high-quality, affordable replacement relay that delivers on its promises. If you have a Franklin well pump in the specified range, this control box offers excellent value, easy installation, and dependable performance. It's a smart buy for maintaining your water system without overspending.
Connector Type: Screw
Contact Type: Normally Open
Current Rating: 35 A
Mounting Type: Panel Mount
Operation Mode: Automatic
Coil Voltage: 230 volts of direct current
Contact Material: Silver
Brand: Formiden
Part Number: RVA2ALKL1P
Compatible Part Numbers: 155031102, 155031110, 305213902
Horsepower Range: 5-15 HP
Pros
- Exact OEM specification replacement
- Made in USA by Barker Microfarads
- Fits multiple Franklin models
- Compact design fits standard control box
- High customer satisfaction rating
Cons
- No returns on electronic components
- Not a universal fit, verify your control box model
- Only the capacitor, not a full control box
This start capacitor is a consumable component engineered for Franklin 1HP, 1.5HP, and 2HP well pump control boxes. It is a direct replacement for Franklin part number 275464113 and also fits control box models 2823008110, 2823018110, 2801084915, 2823018310, and 2823508110. If your pump is slow to start, hums, or trips the breaker, a weak capacitor may be the culprit.
Made in the USA by Barker Microfarads (BMI), this capacitor offers a 105-126 MFD range at 220VAC and works on 50/60Hz systems. The capacitance range matches the original Franklin spec, ensuring proper starting torque and smooth motor operation. Built with a plastic case and an 85°C temperature rating, it handles typical well pump duty cycles effectively.
The capacitor measures 3.35 inches high by 2.15 inches in diameter with a snap-in mount that fits the same mounting clips as the factory original. The cylindrical design is compact and durable, and the markings clearly show MFD and voltage ratings. Replacing a weak start capacitor with this unit restores full performance without replacing the entire control box.
The main drawback is the no-return policy for electronic components, so double-check your control box model before ordering. Also, this is only the start capacitor, not a complete control box or run capacitor. For most Franklin-compatible systems, it is an exact fit, but if you have a non-listed brand, verify compatibility via your existing capacitor spec.
For owners of Franklin 1HP to 2HP well pump systems, this TuhorsePumps start capacitor is a reliable and cost-effective replacement. It delivers OEM-grade specs in a USA-made package, and the high user rating confirms its performance. Skip the service call and keep your water flowing by swapping in this capacitor at the first sign of starting trouble.
Pros
- Quick and easy installation – many users report swapping it out in minutes.
- Durable metal construction resists weather and physical damage.
- Reliable performance with consistent start and run cycles for submersible pumps.
- Fair price for a complete control unit, often cheaper than buying individual parts.
Cons
- Only compatible with 1.5HP submersible pumps, not adjustable for other horsepower ratings.
- Shipping delays may occur depending on the carrier (per some user reports).
- Limited to CSCR type controls; not suitable for other motor control configurations.
The FranklinSports 1.5HP 230V control box is designed specifically for submersible well pumps using a CSCR (Capacitor Start Capacitor Run) motor. It is an ideal replacement part for homeowners and contractors facing a failed control unit, as it restores pump operation quickly without needing to replace the entire pump.
Standout features include a robust metal enclosure rated Type 3R, which protects against rain, sleet, and outdoor exposure. The box accepts wiring up to #2 AWG, offering flexibility for various installation setups. Users consistently highlight how easy it is to mount on a pole or wall and connect within a few minutes.
Real-world performance is excellent, with over 200 reviews averaging 4.7 stars. Customers report that the control box resolves intermittent pump issues and runs reliably for years. Many mention it as a cost-effective fix compared to buying individual components or hiring an electrician.
Build quality is solid with a durable metal casing and clear terminals. However, note that this unit is specific to 1.5HP motors and CSCR systems, so it won't work with other pump types. Also, shipping can sometimes be delayed, as noted in a few reviews, but that is carrier related.
Overall, the FranklinSports control box is a trustworthy, high-value solution for maintaining a well water system. If you need a direct swap for a 1.5HP submersible pump, this unit delivers dependable performance at a fair price.
Brand: FranklinSports
Model: 2823008110
Type: Submersible Motor/Pump Control Box, CSCR
Pump Power: 1.5 HP (1 Phase)
Voltage: 230V AC
Amperage: 11.5 Amps
Enclosure: Type 3R (weatherproof)
Mounting: Pole or Wall
Wire Capacity: Up to #2 AWG
Dimensions: 14 x 12 x 14 inches
Weight: 6 pounds
Material: Metal (black finish)
Pros
- Matches Franklin part #275464118 as a direct replacement.
- Well rated by customers at 4.6 out of 5 stars.
- Durable aluminum shell built for heat dissipation and impact resistance.
- Easy installation using existing control box mounting hardware.
- Versatile compatibility across multiple Franklin 1 to 2 HP control boxes.
Cons
- Broad 105-126 MFD tolerance may not suit motors requiring a very precise capacitance value.
- No mounting hardware is included, so you may need to reuse the original bracket or zip ties.
- Compatibility is not universal; verify your exact control box model before ordering.
The BlueNatHxRPR 105-126 MFD motor start capacitor is a drop-in replacement component designed for Franklin electric well pump control boxes rated at 1.0, 1.5, and 2 HP. It is a practical choice for homeowners, well pump technicians, and DIYers who need to get a water system running again without replacing the entire control box.
This round capacitor is engineered to deliver reliable starting torque to the pump motor, with a broad 105-126 MFD capacitance window and 250V AC rating. User feedback highlights solid performance and a high satisfaction score, making it a dependable repair solution for common Franklin control box failures.
The aluminum shell and classic round design help with heat dissipation and durability in a demanding environment. It measures 3.33 inches high by 2 inches in diameter, matching the original footprint, and can be secured with nylon ties or the existing steel mounting pin.
One limitation is that the capacitance range is not a single fixed value, so it may not be ideal for pumps that require a very precise uF rating. Also, no mounting hardware is included, and you will need to verify that your specific control box model is compatible before purchasing.
For most Franklin 1.0, 1.5, and 2 HP setups, this start capacitor offers excellent value, easy installation, and dependable performance. If you need a straightforward replacement for a failed well pump start capacitor, the BlueNatHxRPR is well worth considering.
Product Name: Well Pump Start Capacitor
Capacitance: 105-126 MFD
Voltage Rating: 250V AC 50/60 Hz
Shape: Round
Dimensions: 3.33 inches height x 2.0 inches diameter
Net Weight: 4.2 oz
Material: Aluminum shell
Compatible Replacements: Franklin Part #275464118
Compatible Control Boxes: 2823008110, 2823018110, 2801084915, 2823018310, 2823508110
Pros
- Sturdy stainless steel construction with powder-coated finish resists corrosion
- Easy to install with clearly labeled connection points
- Weatherproof design allows mounting in exposed locations
- Compatible with many 1 HP 230V submersible pumps (verify 3-wire type)
- Affordable price point for a quality control box
Cons
- Does not include overload protection; a separate circuit breaker may be needed
- Designed primarily for Red Lion pumps; compatibility with other brands must be checked
- Some users note lack of overload relay compared to more expensive models
The Red Lion RLCB10-230 is a VMC control box designed specifically for 1 HP, 230-volt, 3-wire single-phase submersible well pumps. It is an ideal replacement or upgrade for homeowners and professionals maintaining deep well systems. This control box is built to handle continuous duty with a capacitor start/run design and thermal protection.
Standout features include a weather-resistant NEMA 3 rated enclosure that allows for indoor or outdoor installation. The box comes with quick disconnect relay, capacitors, and overloads. Heavy-duty box type terminals and clearly labeled connections make wiring straightforward. Users praise its sturdy construction and easy installation, often noting it as a cost-effective alternative to more expensive brands.
Build quality is robust with a powder-coated stainless steel finish that resists corrosion. The enclosure includes multiple knockouts for conduit entry and a drain hole to prevent moisture buildup. It is UL listed in the USA and Canada, ensuring safety standards are met.
One potential drawback is that this control box does not include overload protection in the traditional sense; some users recommend adding a separate circuit breaker for full protection. Additionally, it is designed primarily for Red Lion pumps, so compatibility with other brands should be verified before purchase.
Overall, the Red Lion RLCB10-230 offers excellent value for those needing a reliable control box for a 1 HP 230V submersible pump. Its durable build, ease of installation, and weatherproof design make it a solid choice for both replacement and new installations. Just ensure your pump is a 3-wire type and consider additional overload protection for critical applications.
Pros
- Plug-in design makes replacement simple: just swap the faceplate and reconnect wiring.
- High-quality cast iron housing withstands moisture, pressure, and temperature extremes.
- Proven reliability with customers reporting decades of trouble-free use.
- Compatible with most 1 HP 3-wire submersible pumps from Franklin and other brands.
- Made in USA ensures strict manufacturing standards and quality control.
Cons
- Only works with 3-wire motors, not compatible with 2-wire systems.
- Requires 230V power supply; verify your system voltage before purchasing.
- Shipping may be slow depending on the carrier, as some customers noted.
The Franklin Electric 1 HP Submersible Water Pump Control Box is a replacement part designed for 3-wire submersible well pumps. It is ideal for homeowners who need to restore pump functionality when the control box components such as the capacitor or relay wear out. This product is not a pump itself but the control box that manages the pump's start and run cycles.
Its standout feature is the plug-in design. The faceplate with all electronic components simply plugs into the existing wiring harness in your current box. This makes installation a 15-minute job for most DIYers, as confirmed by multiple five-star reviews. The included capacitor and relay are common failure points, so replacing the whole box saves troubleshooting time.
Build quality is excellent. The cast iron housing is rugged and corrosion-resistant, and the unit is proudly made in the USA. It measures just under 8 inches on each side, fitting neatly into standard well pump control enclosures. The 230V single phase rating matches typical residential well systems.
One drawback is that this control box is specifically for 3-wire motors; it will not work with 2-wire pumps. Also, it requires a 230V supply, so double-check your system voltage. A few customers noted slower shipping via DHL, but that is a delivery issue, not a product flaw.
Overall, the Franklin Electric 1 HP Control Box is a reliable, easy-to-install replacement for those with compatible pumps. Its proven longevity and high customer satisfaction make it a smart purchase for proactive well maintenance or emergency repairs.
Pros
- Quiet operation as noted by multiple users.
- Easy to install for those with electrical skills.
- Direct replacement for older 3-wire control boxes.
- Durable stainless steel build for long-term use.
- Excellent value for a premium American-made product.
Cons
- Requires basic electrical knowledge for safe installation.
- No built-in run indicator (users can add an LED).
- Only works with 3-wire plus ground submersible motors, not 2-wire models.
The Franklin Electric 2 HP Submersible Water Pump Control Box is a purpose-built component for managing 230V single phase submersible pumps with 3-wire plus ground motors. It is designed for homeowners and professionals who need a reliable replacement or upgrade for an existing well pump control system.
Users consistently praise its quiet operation, with one reviewer noting it runs very quietly. The plug-and-play compatibility makes swapping out old units straightforward, as the layout matches most existing setups. For those with basic electrical knowledge, installation is easy and often completed in minutes.
Built in the USA from stainless steel, the control box is rugged and corrosion resistant, ready for harsh underground environments. The compact dimensions (3.94 inches square and less than half an inch thick) allow for flexible mounting near the well head or in a pump house.
A minor drawback is that the box does not include an integrated run indicator, but users have successfully added an external LED. Additionally, it requires a basic understanding of wiring and is not compatible with 2-wire submersible motors. The price point reflects the premium build and brand reputation.
Overall, the Franklin Electric control box is a top choice for anyone needing a durable, quiet, and easy-to-install control solution for a 2 HP submersible pump. Its high customer rating and positive reviews confirm it delivers on performance and value.
Brand: Franklin Electric
Model: 15c19-17-00594B
Power Source: Corded Electric
Voltage: 230 Volts
Horsepower: 2 HP
Phase: Single Phase
Motor Type: 3 Wire + Ground submersible motors
Material: Stainless Steel
Color: Black
Dimensions: 3.94 x 3.94 x 0.39 inches
Weight: 3.08 kg (approx 6.8 lbs)
Country of Origin: USA
Buying Guide
Compatibility with Your Pump’s Horsepower and Voltage
Every Franklin control box part must match your pump’s horsepower (HP) and voltage. A 1 HP pump requires a capacitor rated for its starting load, while a 2 HP system needs heavier components. For example, the 105-126 MFD (uF) 1.0 1.5 and 2 HP Well Pump capacitor fits multiple HP ranges, but always check the control box model number. If you’re upgrading or replacing a complete box, the Control Box, 1 1/2HP, 230V, 1Phase is a direct fit for submersible motors. For more on sizing, read our complete well pump kit guide for home systems.
Component Type: Capacitor, Relay, or Complete Box
Decide whether you need a single component or a full control box. Start capacitors like the 105-126 MFD (uF) Motor Start Capacitor Compatible are consumable parts that lose capacity over time. Relays, such as the rva2alkl Control Box Well Pump Relay, handle switching and often fail after years of use. If multiple parts are worn, a complete box like the Red Lion RLCB10-230 1-HP 230-Volt VMC Control Box simplifies replacement. For a broader overview, check our well pump kit buying guide.
Build Quality and Brand Reputation
Franklin Electric and Red Lion are trusted names in the industry. The FRANKLIN ELECTRIC 1 HP Submersible Water Pump control box is made in the USA and designed for 3-wire motors. For a larger system, the Franklin Electric 2 Hp Submersible Water Pump control box offers the same reliability. Third-party capacitors from TuhorsePumps and BlueNatHxRPR are also well-reviewed, but always verify they meet OEM specifications. A quiet pump setup often depends on quality control parts; see our top quiet well pump picks for noise-reducing options.
Ease of Installation
Most Franklin control box parts are designed for straightforward replacement. Capacitors and relays typically plug into terminals or mount with screws. Complete boxes require wiring the incoming power and motor leads. If you’re comfortable with basic electrical work, you can swap a capacitor in minutes. For more complex jobs, consider hiring a professional. A well pump that feeds a pressure tank needs a correctly installed control box; our guide to well pumps for pressure tanks covers integration tips.
Final Thoughts
When you need Franklin control box parts, focus on compatibility and quality. For a direct OEM replacement, the FRANKLIN ELECTRIC 1 HP Submersible Water Pump control box delivers reliable performance for 1 HP systems. If you only need a capacitor, the 105-126 MFD (uF) 1.0 1.5 and 2 HP Well Pump capacitor from TuhorsePumps is a cost-effective choice that matches Franklin specifications. Either way, you’ll keep your water flowing without unnecessary downtime.
Frequently Asked Questions
What are common Franklin control box parts that fail?
Start capacitors and potential relays are the most frequent failures in Franklin control boxes. Capacitors lose capacitance over time, while relays can stick or burn out. Complete control boxes may also fail due to overheating or moisture ingress. Regular inspection every few years can catch issues early.
How do I know which capacitor to replace in my Franklin control box?
Check the label on your current capacitor for the microfarad (MFD) rating and voltage. For Franklin 1 to 2 HP boxes, the common range is 105-126 MFD at 220-250V AC. Match the shape and terminal type as well. If the capacitor is swollen or leaking, replace it immediately.
Can I replace a Franklin control box relay myself?
Yes, if you have basic electrical knowledge and can safely disconnect power. The relay is usually mounted on a bracket and connects with push-on terminals. Ensure the replacement relay matches the voltage and current rating of your pump. For 5-15 HP pumps, the rva2alkl Control Box Well Pump Relay is a direct fit for many Franklin models.
What is the difference between a start capacitor and a run capacitor in a well pump control box?
A start capacitor provides a high torque boost to start the motor, then is switched out by the relay. A run capacitor stays in the circuit to improve efficiency and power factor during operation. Most Franklin control boxes use only a start capacitor; run capacitors are found in capacitor-start/capacitor-run (CSCR) designs. For more details, see our well pump for pressure tank.
Write Your Review
No reviews yet. Be the first to share your experience!