If your well water smells like rotten eggs, leaves rust stains on fixtures, or carries a metallic taste, hydrogen peroxide injection can be a game changer. Unlike chlorine, hydrogen peroxide breaks down into oxygen and water, leaving no chemical residue. But to inject it reliably, you need a pump that can handle the pressure, the flow, and the corrosive nature of the chemical. In this guide, we evaluate the Precision Controls Chemical Metering Pump and explain what to look for when choosing a hydrogen peroxide injection pump for your well system. If you are still deciding on the right well pump setup, our complete well pump guide can help you match the injection system to your water source.
Pros
- High output (63.4 GPD) handles demanding applications without running flat out.
- Precise dual controls allow fine-tuning for any dosing requirement.
- Universal voltage compatibility simplifies installation in different electrical environments.
- Complete kit saves time and money on separate component purchases.
- Chemical-resistant PVC liquid end ensures durability with harsh chemicals.
Cons
- Only one customer review available, so long-term reliability is not yet widely confirmed.
- Brand is generic/off-brand, which may concern buyers seeking established name recognition.
- No built-in flow meter or pressure gauge; users may need to add external monitoring for precise verification.
The Precision Controls PF60 (model PF60-P1-000) is a solenoid-driven diaphragm metering pump designed for continuous chemical injection in high-demand water treatment systems. It targets well water disinfection, irrigation rust control, cooling towers, boilers, and commercial dosing applications where reliability and precise output are critical.
With a maximum output of 63.36 GPD at 75 PSI, this pump delivers double the capacity of typical 30 GPD units. The dual control system combines an analog stroke-length dial with a digital stroke-rate controller, offering a 100:1 turndown ratio and up to 360 strokes per minute. This allows operators to dial in exact dosing from a slow trickle to full flow, ensuring repeatable results in variable conditions.
The pump comes as a complete kit including injection/back check valve, suction valve, ceramic foot weight, suction tubing, and heavy-duty UV-resistant black discharge tubing. Setup is straightforward, connecting directly to a waterline or PVC pipe without special tools. The universal AC 100-240V motor ships with a US 115V plug and can be hardwired for 230V service, making it adaptable to pump houses, pool rooms, and industrial panels.
One potential drawback is the limited customer feedback (only one review), so long-term performance data is scarce. Additionally, the pump lacks integrated flow or pressure monitoring, which some users may need to add externally for precise verification. The brand is listed as generic, though it is backed by Precision Controls, a US-based supplier, and replacement parts are available on Amazon.
Overall, the PF60 offers excellent value for those needing a high-output, precise chemical metering pump at a price well below name-brand alternatives. Its robust construction and comprehensive kit make it a strong choice for well water treatment and commercial dosing applications where performance and control are paramount.
Model: PF60-P1-000 (PF60V1)
Power Source: Corded Electric, Universal AC 100-240V (ships with 115V plug, can be hardwired for 230V)
Maximum Flow Rate: 63.36 GPD (2.64 GPH) at 75 PSI
Strokes per Minute: 360
Control Type: Analog stroke-length dial + digital stroke-rate control (100:1 turndown)
Liquid End Material: Chemical-resistant PVC
Color: Blue
Item Dimensions: 8" L x 5" W x 8" H
Item Weight: 10 pounds
Included Components: Pump, suction valve, ceramic weight, suction tubing, discharge tubing, injection/back check valve
Applications: Sodium hypochlorite (chlorine) injection, soda ash pH adjustment, rust-control solutions, hydrogen peroxide, cooling tower treatment
Buying Guide
Flow Rate and Pressure Capacity
Hydrogen peroxide injection requires a pump that can deliver a consistent flow against the back pressure of your well system. For most residential wells, a pump with at least 2 gallons per hour at 75 PSI is sufficient. The Precision Controls model delivers 2.64 GPH at 75 PSI, giving you plenty of headroom for high-demand wells or systems with long pipe runs. If your well has a pressure tank, you need a pump that can overcome the tank’s cut-in pressure. Check our guide on well pumps for pressure tanks to ensure compatibility.
Chemical Compatibility and Wetted Materials
Hydrogen peroxide is an oxidizer and can degrade certain plastics and metals. Look for pumps with a PVC liquid end, ceramic check valves, and Viton or EPDM seals. The Precision Controls pump uses a chemical-resistant PVC head, making it suitable for hydrogen peroxide, chlorine, and other oxidizers. Always verify the manufacturer’s chemical resistance chart before injecting any solution.
Control Precision and Turndown Ratio
Fine-tuning the injection rate is critical for hydrogen peroxide because too little leaves contaminants, and too much can waste chemical or cause oxygen bubbles. A pump with both stroke length and stroke rate adjustment gives you a wide turndown ratio. The Precision Controls pump offers a 100:1 turndown with analog stroke length and digital stroke rate control up to 360 strokes per minute. This lets you dial in the exact dose for your water chemistry.
Ease of Installation and Included Kit
A complete installation kit saves time and ensures you have the right fittings. The Precision Controls pump comes with an injection/back check valve, suction valve, ceramic foot weight, suction tubing, and UV-resistant discharge tubing. You can connect it directly to your waterline or PVC pipe for same-day setup. For a full overview of well pump kits, see our well pump kit buying guide.
Final Thoughts
Whether you are treating iron bacteria, hydrogen sulfide, or simply want a chemical-free alternative for well water disinfection, the Precision Controls Chemical Metering Pump stands out as a versatile and powerful option. Its high output, precise dual controls, and complete installation kit make it a drop-in replacement for expensive name-brand chlorinators, and it handles hydrogen peroxide just as well as chlorine. For homeowners who also need to inject chlorine for routine disinfection, the same pump works seamlessly, giving you one solution for multiple treatment needs.
Frequently Asked Questions
Can I use this pump for hydrogen peroxide injection?
Yes. The Precision Controls pump has a PVC liquid end that is chemically resistant to hydrogen peroxide up to typical residential concentrations (3% to 12%). Always flush the pump with clean water after use to extend seal life. For more on chemical injection systems, visit our chlorine injection pumps category.
What size hydrogen peroxide injection pump do I need for my well?
The required size depends on your well’s flow rate and the concentration of contaminants. A pump delivering 2 to 3 gallons per day at 75 PSI works for most homes. The Precision Controls pump outputs 63.4 GPD maximum, giving you flexibility to adjust the dose. Use a water test to determine the exact injection rate.
How often should I replace the injection tubing?
Inspect the discharge tubing every six months for signs of hardening or cracking. Hydrogen peroxide can degrade standard vinyl tubing over time. The included UV-resistant black tubing lasts longer, but replacement every 12 to 18 months is recommended for optimal performance.
Can I use hydrogen peroxide and chlorine in the same system?
Yes, but never mix them in the same tank or inject them simultaneously. You can use the same pump for either chemical by flushing the system thoroughly between changes. The Precision Controls pump is designed for both applications, making it a versatile choice for well water treatment in 2026.
Write Your Review
No reviews yet. Be the first to share your experience!